Overview Of
Standard Features
Characteristics
- Up
to 950 lb. capacity (750 lb. standard)*
- 40 f.p.m. nominal car speed
- Up to 6 stops with 50 feet of floor to
floor travel*
- Minimum pit depth of 8 inches required (10” recommended)
- Minimum
overhead clearance of 8’0” required (9’6” recommended)
- Up
to 15 square feet interior cab sizes available (12 sq. ft. standard)*
*Consult factory for other custom options available
Equipment
- 1:2
roped hydraulic drive
- (2) 3/8” diameter hoist cables
- Single stage hydraulic piston
and cylinder with pressure balanced self adjusting seal
- Heavy duty cantilevered
design car sling with roller guide shoes
- 8 lb. per foot steel tee guide
rail system
- 220 volt single phase power supply
- Vibration free submersible pump/motor
assembly with 3 or 5 horsepower motor option
- Two speed control valve
with (4) solenoids, soft start and stop, and constant
down speed regulation
Safety Devices
- Type “A” instantaneous
broken rope car safety
- Pipe rupture valve
- Upper and lower terminal limit switches
- Top final limit switch
- Slack cable switch
- Emergency car lighting in cab
- Emergency push/pull stop switch in cab
- Emergency push button alarm
in cab
- Automatic car releveling device
- Floor selectable battery lowering
device
- Emergency manual lowering valve
- Emergency telephone in cab
- Solid panel cab doors with approved safety
switch
- Approved electro mechanical hoistway door interlocks
- Rubber impact
bumper below elevator car
- UL and/or CSA certified electrical and hydraulic
devices
- Manufactured in accordance with ASME A17.1 Safety Code
Controls/Push
Button Fixtures
- Automatic pushbutton control
- Microprocessor based control system with
uninterrupted battery back-up
- Light-up pushbuttons in car and hall
- Digital floor position indicator
with car direction arrows in car
- Automatic in car light with override
switch in cab
- Automatic indicator light time-out feature
- Automatic “Home Park” feature
to designated floor
- “Car Here” indicator lights in
hall
- Low oil protection
timer circuit
|
 |
|
Cab
Finishes & Accessories
- Classic series cab
available in a wide variety of plastic laminate choices and
other options
- Solid panel accordion cab door available in a wide variety
of vinyl laminate
choices
- 36” x 48” x 80” high clear
interior cab size with a variety of cab opening configurations
- Brushed stainless steel
handrail on one sidewall
- Brushed stainless steel cab control panel
Options
- Premier,
Signature, and Hampton Series cabs available in a wide variety of
finishes and other options
- Accordion cab doors in hardwoods, custom
stain and lacquer finish, aluminum,
and clear or bronze acrylic panels
- Recessed telephone cabinet
- Automatic car door operator
- Polished stainless steel, brushed brass,
or polished brass pushbutton faceplate
and handrail finishes
|
