Characteristics
- Up
to 1400 lbs. capacity
- 30 fpm nominal car speed
- *Up to 4 stops
- *Up to 25’-0” travel
- Minimum
pit depth of 3’-6”
required (14” minimum with
alternative means)
- Minimum overhead clearance of
11’-0” required (9’-6” minimum
with alternative means for existing
buildings)
- 42” wide x 60” deep x 81” high
nominal inside car size
- 36” wide x 80” high fully automatic
two-speed horizontal sliding doors
*Consult factory for other custom options.
Equipment
- 1:2
roped hydraulic drive
- (3) 3/8” diameter hoist cables
- Single stage hydraulic piston
and
cylinder with pressure balance
self adjusting seal
- Heavy duty cantilevered design
car sling with roller guide shoes
- 8 lb. per foot steel tee guide
rail system
- 220 volt single phase power supply (three phase optional)
- Vibration
free submersible pump/motor assembly with (5) Horsepower motor
- Two speed control valve with (4) solenoids, soft start and stop,
and constant down-speed regulation
- Heavy duty DC Master door
operator with field adjustable torque fast speed and slow speed control
Safety Devices
- Type “A” instantaneous
governor actuated car safety
- Pipe rupture valve
- Upper and lower terminal
limit switches
- Top final limit switch
- Slack cable switch
- Emergency car lighting
in cab
- Emergency keyed stop switch in cab
- Emergency
push button alarm in cab
- Automatic car releveling device
- Floor selectable
battery lowering device
- Emergency manual lowering valve
- Emergency
telephone in cab
- Solid panel cab doors with approved safety
switch
- Infra-red door edge protection with automatic
door reopen system
- Approved electro mechanical hoistway door
interlocks
- Impact buffers below elevator car
- UL and/or
CSA certified electrical and hydraulic devices
- Manufactured in
accordance with ASME A17.1 Safety Code
- Pit stop switch
|
|
Control/Pushbutton
Fixtures
- Automatic pushbutton control
- Microprocessor
based control system with uninterrupted battery back-up Emergency
lowering with automatic door operation
- Light-up push buttons
in car and hall with Braille
- Digital floor position indicator
with direction arrows in car
- Floor “Stop/Pass” audible
signal in car
- Automatic cab lighting with override switch
- Automatic
indicator light time-out feature
- Automatic “Home
Park” feature to designated floor
- Low oil protection
timer circuit
- Top of car inspection operation
- Recessed telephone
box with phone
Cab
Finishes and Accessories
- Fire rated wood core
wall panels with black filled reveals to simulate
applied
panels faced with plastic laminate available in several solid, textured,
and wood grain finishes
- Car entrance including strike column, return
panel, and transom are #4 brushed
stainless steel finish
- Two speed reinforced hollow metal horizontal
sliding car doors with #4 brushed
stainless steel finish
- Steel canopy with fire rated thermoclear
panel suspended ceiling and
fluorescent lighting above
- 3/8”x2” #4 brushed stainless
steel handrail on (1) side wall
- Extruded aluminum car sill
- #4 brushed stainless
steel certificate frame
- Unfinished plywood sub-floor in cab
Hoistway Doors
- Two
speed horizontal sliding fire rated door and frame assemblies
with prime (paintable) finish and extruded aluminum sills
|
